- Home
- ยป
- Our Products
- »
- Gun Power Supply
Gun Power Supply
Gunn Power Supply
Model X-110 Gunn Power Supply comprises of regulated D.C. power supply and a square wave generator, designed to operate Gunn-Oscillator model 21 52 etc. and Pin-Modulator model 451 simultaneously.
The D.C. Voltage is variable from 0 to 12.0 volts. The front-panel digital meter monitors the Gunn voltage and the current drawn by the Gunn-diode.
The square waves of generators is variable from 0 to 1 0 Volts in amplitude and from 850 to 11 50 Hz in frequency.
The power supply has been so designed to protect Gunn diode from reverse voltage application, over transient and low frequency oscillations by the negative resistance of the Gunn-diode.
Specification
Model No. | X-110 |
Gunn Bias Voltage | 0 to 12 V |
Current | 0 to 1.0 A (Max.) |
Regulation | 0.2% for ± 10% mains variation |
Ripple | 2 mv (rms) |
Modulation Frequency | 850 to 11 50 Hz, Square wave |
Mod. Amplitude | 0 to 10.0 V (peak to peak) |
Output Connectors | BNC (F) for Gunn Bias UHF (F) for Pin-mod. |
Mains Supply | 230 V, 50 Hz, 25 watts aprox, |
Standard Accessories | (i) Mains Cable ( 01 No.) (ii) Coax. Cable BNC to BNC (01 No.) (iii) Coax. Cable BNC to UHF (01 No.) (iv) Spare Fuses (02 Nos.) (v) Instruction Manual (01 No.) |
Additional Information:
- Item Code: X-110
Gunn Power Supply
Model X-l 11 Gunn Power Supply has been designed to operate high frequency Gunn Oscillators and where PIN Modulators are not available, In this supply variable frequency square Wave modulation is provided on the bias supply itself.
Front panel digital meter reads the Gunn Bias Voltage and the current drawn by the Gunn-Diode through a switch.
This consists of a regulated D.C. power supply 2.0 to 1 2.0 V variable and a square wave generator of variable frequency 850 to 11 50 Hz.
Specification:
Model No. | X-l 11 |
Gunn Bias Voltage | 1 to 1 2 V |
Current | 0 to 1.0 A |
Regulation | 0.2% for ± 1 0 mains variation |
Modulation Selector Switch | CW& INT. |
Modulation Frequency | 850 to 11 50 Hz square-wave |
Output Connector | BNC (F) for Gunn Bias |
Digital Panel Meter | Read Gunn bias voltage & current drawn |
Mains | 230 V, 50 Hz 35 Watts |
Std. Accessories | i) Mains Cable (1 No.) ii) Coax. Cable BNC to BNC (1 No.) iii) Spare Fuse (2 Nos.) iv) Instruction Manual (1 No.) |
Additional Information:
- Item Code: X-111