Klystron Power Supply, Model KPS-151, is a state-of-the-art solid state, regulated power supply for operating low power Klystrons such as 2K25, 723 A/B, RK 5976, 726, K-19 etc.

Model - 151 incorporates a number of proerietary features :

1. Regulated Beam Supply and Repeller Supply voltages.
2. Overload TRIP protection for Beam Supply output.
3. LED Digital metering for Beam voltage, current and Repeller voltage.
4. Stand-by mode.
5. Ultra compact and Reliable.
6. Modular construction for easy maintenance

In addition to AM and FM modulation of Beam current, a provision for externally modulating the klystron supply with desired signal waveform has been provided. Model KPS-151 utilizes quality components, rugged construction and ergonomically designed front panel. A careful handling of the instrument will provide years of trouble free service.

230 VAC, ± 10%, 50 Hz

Voltage : 240-420 Vdc, Variable Current : 50 mA Regulation : 0.5% for 10% I/P variation Ripple : < 5mv RMS

10-270 Vdc, Variable Regulation : 0.25% for 10% I/P variation

6.3 Vdc

65 mA

AM (Square)

FM(Saw-tooth)

500 - 2500 Hz

150 - 300 Hz

0 - 100 V

0 - 65 V

Through external Modulating Signal

Digital display for

(a) Beam Voltage
(b) Beam Current
(c) Reppler Voltage

Only Heater Supply ON

(a) 8-Pin Octal Socket

(b) BNC for External Modulation

26.5 (L) * 13 (H) * 26.5 (D) Cm3

Klystron Power Supply, Model KPS-151, is a state-of-the-art solid state, regulated power supply for operating low power Klystrons such as 2K25, 723 A/B, RK 5976, 726, K-19 etc.

Model - 151 incorporates a number of proerietary features :

1. Regulated Beam Supply and Repeller Supply voltages.
2. Overload TRIP protection for Beam Supply output.
3. LED Digital metering for Beam voltage, current and Repeller voltage.
4. Stand-by mode.
5. Ultra compact and Reliable.
6. Modular construction for easy maintenance

In addition to AM and FM modulation of Beam current, a provision for externally modulating the klystron supply with desired signal waveform has been provided. Model KPS-151 utilizes quality components, rugged construction and ergonomically designed front panel. A careful handling of the instrument will provide years of trouble free service.

230 VAC, ± 10%, 50 Hz

Voltage : 240-420 Vdc, Variable Current : 50 mA Regulation : 0.5% for 10% I/P variation Ripple : < 5mv RMS

10-270 Vdc, Variable Regulation : 0.25% for 10% I/P variation

6.3 Vdc

65 mA

AM (Square)

FM(Saw-tooth)

500 - 2500 Hz

150 - 300 Hz

0 - 100 V

0 - 65 V

Through external Modulating Signal

Digital display for

(a) Beam Voltage

(b) Beam Current

(c) Reppler Voltage

Only Heater Supply ON

(a) 8-Pin Octal Socket

(b) BNC for External Modulation

26.5 (L) * 13 (H) * 26.5 (D) Cm3

Model At -211b Power Meter

Four Ranges With Full Scale Readings Of 10 And 100microwatts, 1 And 10 Milli Watts

+/-1% Of Full Scale On Milli Watt Range And +/- 1.5 % On Micro Watt Range

Less Than 0.25% Of Full Scale Peak

At Recorder Output , 35ms Time Constant (Typical)

Automatic , Operated By Front Panel Switch

Less Than 0.5% Of Full Scale When Zeroed On Most Sensitive Range.

11 Position Switch Normalizes Meter Reading to

Account for Thermistor Mount Calibration Factor

Proportional to indicated power with 1 volt c corresponding to Full scale 1 K ohm output impedence

Direct connection to Thermistor bridges used in(VRF and V COMP) Instruments calibration and precision power Measurement

230V+/- 10% AC 50 to 60 Hz , 10 Watts

29X20.5X16 CMS